RT7772 Details

SVE/Air Sparge System in Seabox Container

Rotary Screw type Schulz Compressor with 40hp 480V 3 phase motor
Rated for 130 cfm @ 50 psi
Includes integrated inlet Filter Silencer, and discharge silencer
Includes filter bank
Includes Pressure/Temp gauges, Temperature, pressure and flow transmitters
Includes 22 - 1" sparge legs, each plumbed with a solenoid valve, check valve, pressure gauge, control valve, and rotameter
Manifold plumbed and programmed into two zones with 11 legs each, with capability of switching certain legs from one zone to the other

Busch WA3125 Rotary Lobe PD package -
Coupled to a 50Hp 480V 3ph TEFC motor
System is mounted on a silencer skid base
Includes integrated inlet and discharge silencers
Rated for minimum 1188 SCFM @ 75" WC
MS-200+ Aluminum Moisture separator with high float switches
Inlet flow meter and control valves
Effluent pump and 1/2" Stainless Steel flow totalizer with Viton O-rings.
Discharge is plumbed through a bag filter, HP-90 liquid phase carbon vessel prior to exiting trailer
Manual dilution valve, vacuum relief valve, inline air filter and gauges, pitot tube and mag gauge for flow monitoring
Discharge Includes Pressure/Temperature gauges
Pressure relief, and discharge stack
Includes 19 - 2" SVE leg, plumbed with manual control valve, vacuum gauge, sample port, and port for flow measurement

Nema 4/12 system control Panel
PLC controller with wireless connectivity and remote login capabilities, Email on alarm functionality
Includes Telemetry Service. No configuration required by Client.
Includes all motor starters, HOA switches and IS safety barriers as required.
Includes load center for power distribution

PRM Filtration, Inc., A Division of Product Recovery Management
200 20th St, Butner, NC 27509
(888) TREAT-IT